mains cables (factory prepared)
The Supra LoRad mains cable is a CE-approved audio grade replacement mains cable which is now available with factory terminated connectors (in this case, a UK 13 Amp mains plug and a matching Supra IEC connector).

Or you can buy it in either a kit version, or you can buy the various parts required and make up your own cables to suit your specific needs.

Now you can effectively shield all those sensitive low-level audio and video cables from picking up stray electro-magnetic interference from your existing (low cost) mains cable.

If you don't want to replace your mains cables (or they are captive, so you can't), then try the Power Wraps, which can reduce RF interference simply.



Supra LoRad 1.5 CS-BS UK shielded mains cable - factory terminated     Was £ 39.99 £ 31.99  
Add to basketBasket

Hi-Fi Choice - 2x 'Bronze award winner' - Dec 2004 AND Dec 2005

The Supra LoRad 1.5 is a CE-approved audio grade replacement mains cable which is available with factory terminated connectors:
Either with a UK 13 Amp mains plug or a European Schuko connector (for European customers only).

At the opposite end, a matching Supra IEC connector is fitted.

Now you can effectively shield all those sensitive low-level audio and video cables from picking up stray electro-magnetic interference from your existing (low cost) mains cable by replacing it with this cable.

And buying the factory terminated version solves the problem of buying the parts and wiring them yourself !!

The factory-terminated LoRad 1.5 is available in a range of lengths.

Please do NOT compare this cable to other replacement mains cables, which may NOT be assembled using a CE-approved cable - and hence may not be safety tested and fit for the purpose - LoRad cables fully conform to the strict CE-testing procedures and hence are approved for use in all CE markets (including UK).

Current rating: 10 Amps
Only available with Ice Blue outer sheathing

Available lengths:
UK 13 Amp standard:
1.0m - IN STOCK
1.5m - IN STOCK
2.0m - IN STOCK
4.0m - IN STOCK

Schuko European standard:
1.0m - IN STOCK
1.5m - IN STOCK
2.0m - IN STOCK
No other lengths available at present
Please place your order now - we will not charge your credit card until ready to ship.




Supra LoRad 1.5 kit Supra 13A UK Mains Plug to IEC In-Line Socket     Was £ 7.50 £ 6.00  
Add to basketBasket
A DIY kit comprising:

1x Supra UK 13A Mains Plug
13 Amp fuse fitted.
BS1363-approved.
Brass internal fittings with copper type screws.
Cable exit gland for cable diameter of 8mm max.
Colour: Ice Blue (to match cable colour).

1x piece of Supra LoRad 1.5 Mains Cable
One cut length of Supra LoRad 1.5 shielded mains cable.
Choice of 0.75m, 1.0m, 1.5m, 2.0m, 3.0m or 4.0m lengths.
Current rating: 10 Amps
Only available with Ice Blue outer sheathing

A choice of IEC Connectors
Choose from either:
1) Basic version
Available in - straight or right angled, COLD or HOT types.
CE-approved. Made by Schurter.
Clamshell design, with a single screw holding the two piece body together.
Brass internal fittings.
Colour: BLACK only

or

2) Supra IEC
A standard fit IEC in-line socket connector (aka 'kettle plug').
CE-approved.
Brass internal fittings with copper type screws.
Colour: ICE BLUE (HOT) or GREY (COLD)

Note: We only supply the parts - this cable must be assembled by the customer. Common sense electrical knowledge required.

Be sure to download the 'SAFETY ADVICE' document, available from this link: HERE, so you know how to prepare and connect the LoRad conductors to mains connectors.

IN STOCK





Supra LoRad 1.5 kit Supra 13A UK Mains Plug to 1x 4-way UK Extension     Was £ 7.50 £ 6.00  
Add to basketBasket

A DIY kit comprising:

1x Supra UK Mains Plug
Supra UK 13A 3-pin Mains Plug is purpose designed to be used with Supra LoRad mains cable.

13 Amp fuse fitted.
BS1363-approved.
Brass internal fittings with copper type screws.
Cable exit gland (11mm exit diameter).
Colour: Ice Blue (to match cable colour).

Mains Cable:
1x piece of Supra LoRad 1.5
One cut length of Supra LoRad 1.5 shielded mains cable.
Choice of 1.0m, 2.0m, 3.0m or 4.0m lengths.
Current rating: 10 Amps
Only available with Ice Blue outer sheathing

Choice of 4 way extension sockets
1) 1x 4-way Extension Socket, unfused and fitted with Red neon bulb.
BS-approved.

Colour: WHITE

or

2) 1x 4-way Extension Socket, fused and fitted with Red neon bulb.
BS-approved.

Colour: WHITE

Note: We only supply the parts - this cable must be assembled by the customer. Common sense electrical knowledge required.

Be sure to download the 'SAFETY ADVICE' document, available from this link: HERE, so you know how to prepare and connect the LoRad conductors to mains connectors.

IN STOCK





Supra LoRad 1.5 CS-EU shielded mains cable - factory terminated     Was £ 47.99 £ 38.39  
Add to basketBasket
The Supra LoRad 1.5 is a CE-approved audio grade replacement mains cable which is available with factory terminated European Schuko connector (for European customers only).

At the opposite end, a matching Supra IEC connector is fitted.

Now you can effectively shield all those sensitive low-level audio and video cables from picking up stray electro-magnetic interference from your existing (low cost) mains cable by replacing it with this cable.

And buying the factory terminated version solves the problem of buying the parts and wiring them yourself !!

The factory-terminated LoRad 1.5 is available in a range of lengths.

Please do NOT compare this cable to other replacement mains cables, which may NOT be assembled using a CE-approved cable - and hence may not be safety tested and fit for the purpose - LoRad cables fully conform to the strict CE-testing procedures and hence are approved for use in all CE markets (including UK).

Current rating: 10 Amps
Only available with Ice Blue outer sheathing

Available lengths:
Schuko European standard:
1.0m - IN STOCK
1.5m - IN STOCK
2.0m - IN STOCK
No other lengths available at present
Please place your order now - we will not charge your credit card until ready to ship.




Supra LoRad 2.5 kit Supra 13A UK Mains Plug to IEC In-Line Socket     Was £ 7.50 £ 6.00  
Add to basketBasket
A DIY kit comprising:

1x Supra UK 13A Mains Plug
13 Amp fuse fitted.
BS1363-approved.
Brass internal fittings with copper type screws.
Cable exit gland for cable diameter of 8mm max.
Colour: Ice Blue (to match cable colour).

1x piece of Supra LoRad 2.5 Mains Cable
One cut length of Supra LoRad 2.5 shielded mains cable.
Choice of 0.75m, 1.0m, 1.5m, 2.0m, 3.0m or 4.0m lengths.
Current rating: 16 Amps
Only available with Ice Blue outer sheathing

A choice of IEC Connectors
Choose from either:
1) Basic version
Available in - straight or right angled, COLD or HOT types.
CE-approved. Made by Schurter.
Clamshell design, with a single screw holding the two piece body together.
Brass internal fittings.
Colour: BLACK only

or

2) Supra IEC
A standard fit IEC in-line socket connector (aka 'kettle plug').
CE-approved.
Brass internal fittings with copper type screws.
Colour: ICE BLUE (HOT) or GREY (COLD)

Note: We only supply the parts - this cable must be assembled by the customer. Common sense electrical knowledge required.

Be sure to download the 'SAFETY ADVICE' document, available from this link: HERE, so you know how to prepare and connect the LoRad conductors to mains connectors.

IN STOCK





Supra LoRad 2.5 kit Supra 13A UK Mains Plug to 1x 4-way UK Extension     Was £ 7.50 £ 6.00  
Add to basketBasket

A DIY kit comprising:

1x Supra UK Mains Plug
Supra UK 13A 3-pin Mains Plug is purpose designed to be used with Supra LoRad mains cable.

13 Amp fuse fitted.
BS1363-approved.
Brass internal fittings with copper type screws.
Cable exit gland (11mm exit diameter).
Colour: Ice Blue (to match cable colour).

Mains Cable:
1x piece of Supra LoRad 2.5
One cut length of Supra LoRad 2.5 shielded mains cable.
Choice of 1.0m, 2.0m, 3.0m or 4.0m lengths.
Current rating: 16 Amps
Only available with Ice Blue outer sheathing

Choice of 4 way extension sockets
1) 1x 4-way Extension Socket, unfused and fitted with Red neon bulb.
BS-approved.

Colour: WHITE

or

2) 1x 4-way Extension Socket, fused and fitted with Red neon bulb.
BS-approved.

Colour: WHITE

Note: We only supply the parts - this cable must be assembled by the customer. Common sense electrical knowledge required.

Be sure to download the 'SAFETY ADVICE' document, available from this link: HERE, so you know how to prepare and connect the LoRad conductors to mains connectors.

IN STOCK





Supra LoRad 2.5 CS-EU shielded mains cable - factory terminated     Was £ 52.49 £ 41.99  
Add to basketBasket
The Supra LoRad 2.5 is a CE-approved audio grade replacement mains cable which is available with factory terminated European Schuko connector (for European customers only).

At the opposite end, a matching Supra IEC connector is fitted.

(A factory terminated UK version is NOT available as the individual cable conductors are greater than 1.5 sq. mm diameter, which is greater than the BS regulations allow !!).

Now you can effectively shield all those sensitive low-level audio and video cables from picking up stray electro-magnetic interference from your existing (low cost) mains cable by replacing it with this cable.

And buying the factory terminated version solves the problem of buying the parts and wiring them yourself !!

The factory-terminated LoRad 2.5 is available in a range of lengths.

Please do NOT compare this cable to other replacement mains cables, which may NOT be assembled using a CE-approved cable - and hence may not be safety tested and fit for the purpose - LoRad cables fully conform to the strict CE-testing procedures and hence are approved for use in all CE markets (including UK).

Current rating: 16 Amps
Only available with Ice Blue outer sheathing

Available lengths:
Schuko European standard:
1.0m - IN STOCK
1.5m - IN STOCK
2.0m - IN STOCK
No other lengths available at present
Please place your order now - we will not charge your credit card until ready to ship.




AUDUSA Eupen GNLM Mains Cables        
Add to basketBasket

GNLM mains power cables are to our knowledge the only AC mains cable that effectively destroys mains borne RF and EMI.

Effective on all Hi Fi Components, DVD players, Cable and Sky Boxes, CRT, Plasma and TFT TV's.

All mains power cables are available with a range of plugs and sockets including: UK, Schuko (EC), Australian, Danish, France , Israeli, Swiss, USA, at the wall socket end and IEC, fig of 8 (Telefunken), 16 amp IEC, Neutrik, at the equipment end.

SILVER UPGRADE AVAILABLE ON ALL GNLM CABLES - see options.

The AUDUSA-Eupen GNLM 05/25 mains cable is rated at 22 amps - and the GNLM 05/04 - which is the same as the GNLM 05/25 except it uses larger diameter conductors and a different colour of outer sheath. The 05/04 cable is rated at 30amps.

These come is a range of lengths and are usually fitted with a standard MK 13 Amp UK plug and a Martin Kayser IEC at the other end.

We can also supply the Silver Edition cables, which have silver-plated MK Tough plugs fitted.

At present, we stock the following lengths and types:

GNLM 05/25 CSA 1.0m UK - IN STOCK
GNLM 05/25 CSA 1.5m UK - IN STOCK
GNLM 05/25 CSA 2.0m UK - TO ORDER

GNLM 05/25 CSA 1.0m SE (Silver Edition) UK - IN STOCK
GNLM 05/25 CSA 1.5m SE (Silver Edition) UK - IN STOCK

GNLM 05/04 - All versions - TO ORDER

OTHER LENGTHS: 2.5m, 3m, 4m and 5m - TO ORDER - POA

NOTE: All optional connector options are SUPPLIED TO ORDER (as there are too many options to keep ALL in stock at once) - and these are usually available within 3-4 days, as these are mostly made to order.

As demand for these items picks up, so we will expand the range we keep from stock.




AUDUSA Eupen GNLM SEB Mains Cables        
Add to basketBasket

GNLM mains power cables are to our knowledge the only AC mains cable that effectively destroys mains borne RF and EMI.

The SEB version is the Standard Edition Braid - the same cable as the standard GNLM, but fitted with an outer braid.

Effective on all Hi Fi Components, DVD players, Cable and Sky Boxes, CRT, Plasma and TFT TV's.

All mains power cables are available with a range of plugs and sockets including: UK, Schuko (EC), Australian, Danish, France , Israeli, Swiss, USA, at the wall socket end and IEC, fig of 8 (Telefunken), 16 amp IEC, Neutrik, at the equipment end.

SILVER UPGRADE AVAILABLE ON ALL GNLM CABLES - see options.

Available in ONE flavour, SEB (fitted with outer braid (black on 05/25 and white on 05/04), and fitted as standard with the Large IEC and MK 13 Amp UK plug)....as well as two different gauges.

The AUDUSA-Eupen GNLM 05/25 SEB mains cable is rated at 22 amps - and the GNLM 05/04SEB - which is the same as the GNLM 05/25 except it uses larger diameter conductors and a different colour of outer sheath. The 05/04 cable is rated at 30amps.

These come is a range of lengths and are usually fitted with an MK 13Amp UK plug and a Large IEC at the other end.

At present, we offer the following lengths and types:

GNLM 05/25 CSA 1.0m SEB - TO ORDER
GNLM 05/25 CSA 1.5m SEB - TO ORDER
GNLM 05/25 CSA 2.0m SEB - TO ORDER

GNLM 05/4 CSA 1.0m SEB - TO ORDER
GNLM 05/4 CSA 1.5m SEB - TO ORDER
GNLM 05/4 CSA 2.0m SEB - TO ORDER

OTHER LENGTHS: 2.5m, 3m, 4m and 5m - TO ORDER - POA

NOTE: All optional connector options are SUPPLIED TO ORDER (as there are too many options to keep ALL in stock at once) - and these are usually available within 3-4 days, as these are mostly made to order.

As demand for these items picks up, so we will expand the range we keep from stock.




LAT AC-2 Mk11 Power Cord SE Edition        
Add to basketBasket

LAT AC-2 SILVER EDITION Mains cables are now available.

These come is a range of lengths and are usually fitted with an MK 13Amp plug (with SILVER plated contacts) and a High quality IEC at the other end.

Stock now available in the following lengths:
0.9m - due January
1.2m - IN STOCK
1.5m - IN STOCK
1.8m - TO ORDER
2.1m - TO ORDER
2.4m - TO ORDER

To order lengths available to special order (approx 2 week delivery time).




http://www.cablesdirect2u.co.uk/shop/index.html