mains distribution blocks
NEW - the Supra MD06-BS/SP 6-way Surge Protected UK Mains Distribution Blocks have now been announced and have BS approval granted to them.

After quite a delay (over a year, while BS approval was taking place), we've now got these in stock...!

So make sure you place your order soonest, so you are not waiting too long and can take advantage of the initial 'launch price' of just £129.99 (inc VAT) valid until present stocks run out..

Supra LoRad MD06-BS/SP 6 way UK Mains Block + Cable     Was £ 129.99 £ 103.99  
Add to basketBasket
SPECIAL DEAL - The Supra MD06-BS/SP Mains Distribution Block is now available.

This particular stock item INCLUDES the cable that goes from the wall socket to the Mains Block....and as such, you can SAVE £20 by buying the two items at the same time....normally, the block alone is £149.99, so the COMBINED price of block and cable starts from £169.98.

NOTE: Input to the MD06-BS/SP is via a single IEC socket. This cable is available in 1m, 1.5m 2m and 4m lengths which you should choose when ordering this item. This enables you to specify the exact length of cable you need to go from wall socket to block.

This block is fitted with 6x UK 13 Amp mains sockets, which are fitted at 45 degrees, so as to reduce the floor space that the block takes up.

A three way Surge Protection system, protects Live<>Neutral, Live<>Earth and Neutral<>Earth, thereby protecting your hi-fi and AV system from most of the nasties present on the UK mains supply.

A Non-Intrusive Mains Filter also reduces the mains borne interference, while the all aluminium extruded chassis acts as a shield against RF.

A number of holes are present in the bottom flange of the block, allowing it to be screwed to a wall or other support.

Picture and exact specification to follow (once confirmed).

Priced per set (block + cable)

OUT OF STOCK - more due 12th Jan 2009
Please place your order now - we will not charge your credit card until ready to ship.


Supra LoRad MD06-BS/SP 6 way UK Mains Block     Was £ 149.99 £ 119.99  
Add to basketBasket
NEW - The Supra MD06-BS/SP Mains Distribution Block is now available.

NOTE: Input to the MD06-BS/SP is via a single IEC socket, enabling you to (optionally) specify the exact length of cable you need to go from wall socket to block - if you need an 'input cable', see other sections or choose the Block + Cable item below.

This block is fitted with 6x UK 13 Amp mains sockets, which are fitted at 45 degrees, so as to reduce the floor space that the block takes up.

A three way Surge Protection system, protects Live<>Neutral, Live<>Earth and Neutral<>Earth, thereby protecting your hi-fi and AV system from most of the nasties present on the UK mains supply.

A Non-Intrusive Mains Filter also reduces the mains borne interference, while the all aluminium extruded chassis acts as a shield against RF.

A number of holes are present in the bottom flange of the block, allowing it to be screwed to a wall or other support.

Picture and exact specification to follow.

Priced each.

OUT OF STOCK - more due 12th Jan 2009
Please place your order now - we will not charge your credit card until ready to ship.


Supra LoRad MD06-EU 6 way Euro Mains Block     Was £ 129.99 £ 103.99  
Add to basketBasket
NEW - The Supra MD06-EU Mains Distribution Block is also available.

NOTE: Input to the MD06-EU is via a single IEC socket, enabling you to (optionally) specify the exact length of cable you need to go from wall socket to block.

This block is fitted with 6x Schuko mains sockets.

A Non-Intrusive Mains Filter reduces the mains borne interference, while the all aluminium extruded chassis acts as a shield against RF.

(This version does NOT have Surge Protection built-in).

A number of holes are present in the bottom flange of the block, allowing it to be screwed to a wall or other support.

A 10 Amp current sensing relay switch is fitted, which if tripped, can be easily reset.

Picture and exact specification to follow (once confirmed).

Priced each.

This item is ONLY available for sale to EC customers, as it is NOT LEGAL to use this in the UK for domestic purposes. It is acceptable for us to sell this on a strictly industrial basis, for example: to enable foreign touring groups to use their requipment in UK.

Please Note: FREE DELIVERY on this item is not possible, due to the size and weight of this item. As such a small shipping charge WILL be incurred.

IN STOCK
Please place your order now - we will not charge your credit card until ready to ship.


Audusa Eupen Mains Block + Cable        
Add to basketBasket

All Steel Distribution blocks with 1.0m CSA Cable and MK Tough Plug.

We feature the Audusa Eupen Mains blocks, which comprise a sturdy metal distribution block, each of which is fitted with a 1m captive Eupen CSA 05/04 mains input cable terminated in a standard MK 13 Amp UK plug.

A number of types are available: 4 way, 6 way and 8 way featuring UK 13 Amp sockets.

At present we have the following available:
4 way UK - TO ORDER
6 way UK - IN STOCK
8 way UK - IN STOCK

Other socket types such as Schuko and USA outlet sockets are also available (for a £10 premium) - but these are to Special Order only (approx 1-2 weeks for delivery).

Likewise the plug fitted to the input cable maybe be specified as UK, Schuko or US versions.



http://www.cablesdirect2u.co.uk/shop/index.html