A right-angled 3-pole IEC in-line socket connector (COLD type) made by Schurter.
This connector will fit audio and AV equipment which are fitted with standard 6 Amp IEC type sockets EXCEPT those that require 'HOT' type IEC connectors.
NOTE: This connector is only approved for use with products that DO NOT generate heat or get warm. Typically, this applies to most hi-fi and AV products.
If the product does generate heat, then you may need to specify the 'HOT' approved version, as the 'COLD' type connector may not fit the socket on the equipment - check to see if the existing IEC has a groove on the bottom edge of the connector - if it does you need the 'HOT' version.
CE-approved - 10A, 250V CSA-approved - 15A, 250V UL-approved General Rating: 15A, 125V A.C. for North America (or 10A, 230V for EC). Clamshell design, with a single screw holding the two piece body together. Brass internal fittings. Colour: Black only Max Cable Entry diameter: 8mm (just right for LoRad 1.5)
To use this IEC connector with LoRad 2.5, you must dispense with the cable exit gland.
This connector has a very effective strain relief grip that can be used to ensure the cable cannot be pulled out of the connector.
Priced each.
IN STOCK
|
|
|