special orders

Special Orders     £ 1.00  
Add to basketBasket
Select this 'item' to order specific cables that are not featured in any other section.

For instance, if you want a longer cable than is already listed, or maybe one terminated with different connectors, you should add this 'Special Orders' item to your shopping basket. Then include specific details on the type and length of cable you want in the 'Your notice to us' section of the order form when you click on the 'Checkout' icon.

You can also use this if we have already provided you with a quotation for a cable and you now wish to go ahead and order it.

(Note: We use a nominal value of £1 for this item - the actual amount and product availability will be confirmed by a personal email from our Sales Dept.).


Supra Nylon Braid 10mm (Black)     £ 24.99  
Add to basketBasket
Supplied in 10 metre packs.

Allows you to bi-wire Ply 2.0 Series speaker cables together, and helps keep the cables tidy.

NOTE: TO ORDER ONLY - NOT A STOCK ITEM


Supra Nylon Braid 8mm (White)     £ 14.99  
Add to basketBasket
Supplied in 5 metre packs.

Allows you to bi-wire Ply Series speaker cables together, and helps keep the cables tidy.

NOTE: TO ORDER ONLY - NOT A STOCK ITEM


Supra Rubber Sleeves 5mm     £ 3.49  
Add to basketBasket
4 pieces per pack.

Allows you to finish the ends of the Nylon Braid if bi-wiring Ply Series cables together.

NOTE: TO ORDER ONLY - NOT A STOCK ITEM


Supra Rubber Sleeves 7mm     £ 3.49  
Add to basketBasket
4 pieces per pack.

Allows you to finish the ends of the Nylon Braid if bi-wiring Ply Series cables together.

NOTE: TO ORDER ONLY - NOT A STOCK ITEM


Supra Rubber Sleeves 10mm     £ 3.99  
Add to basketBasket
4 pieces per pack.

Allows you to finish the ends of the Nylon Braid if bi-wiring Ply Series cables together.

NOTE: TO ORDER ONLY - NOT A STOCK ITEM


Supra Rubber Trousers     £ 3.99  
Add to basketBasket
2 pieces per pack.

Allows you to finish the ends of the thinner speaker cables, such as Classic 2.5 and JenTech cables.

NOTE: TO ORDER ONLY - NOT A STOCK ITEM


Supra Quattro 4x4T Bi-wire speaker cable (per linear metre)     £ 8.00  
Add to basketBasket

Hi-Fi World 'Recommended' in a recent edition of the magazine.

Supra Quattro 4x4 is a multi-stranded, tin-plated bi-wire speaker cable using 99.999% pure Oxygen Free Copper for it's signal carrying conductors.

Each conductor is colour coded to assist connections at both amp and speaker ends. Cross-sectional area = 4mm per conductor (11AWG).

Supra Banana plugs or Fork spades are highly recommended to terminate this cable.

For current production the conductors are connected as follows:
Red+Blue=Positive
Black+White=Negative

(Older production used:
Red+Green=Positive
Blue+White=Negative)

Sold (unterminated) off the reel. Priced per linear metre - enter in the order quantity box the number of linear metres you require off the reel.

Available in Anthracite colour outer jacket only.

Weight per linear metre off the reel - 0.25 kg

TO ORDER ONLY


Supra HDMI (F) <-> DVI (M) adaptor     £ 29.99  
Add to basketBasket

Convert your DVI socket to take a HDMI plug.

This adaptor converts a DVI socket (as found on numerous projectors and monitors and other similar hardware), that it can accept a cable with a HDMI (male) plug on the end.

Both connectors on this adaptor are gold-plated for maximum signal transfer and longevity.

Please note: We do not recommend the use of HDMI<>DVI adaptors with cables over 8.0m in length - it would be preferable to purchase the correctly terminated cable in the first instance.

Price is for each adaptor.

Price reduced: now £29.99 each (was £39.99 each)

TO ORDER ONLY

Please place your order now - we will not charge your credit card until ready to ship.


Supra DVI (F) <> HDMI (M) adaptor     £ 29.99  
Add to basketBasket

Convert your DVI cable to fit a HDMI socket.

This adaptor converts a DVI cable so that you can plug it into a HDMI socket.

Both connectors on this adaptor are gold-plated for maximum signal transfer and longevity.

Please note: We do not recommend the use of HDMI<>DVI adaptors with cables over 8.0m in length - it would be preferable to purchase the correctly terminated cable in the first instance.

Price is for each adaptor.

Price reduced: now £29.99 each (was £39.99 each)

TO ORDER ONLY

Please place your order now - we will not charge your credit card until ready to ship.


Supra IEC Connector - Straight     £ 10.00  
Add to basketBasket

The Supra IEC Line Connector is purpose designed to be used with Supra LoRad mains cable.

This connector will fit audio and AV equipment which are fitted with standard 6 Amp IEC 'kettle' type sockets. Available in either HOT or COLD types (HOT type pictured - has notch on underside).

CE-approved.
Brass internal fittings with copper type screws.
Cable exit gland: Choice of 8mm or 11mm
Colour: Grey (Note: As an alternative, we can currently offer a limited number of Supra IEC's in Ice Blue colour in either (HOT) or (COLD) types.....but there aren't many - less than half a dozen left).

Exact specification to follow (once confirmed).

Priced each

TO ORDER ONLY


Insert Audio SP-04 Spades (pack of 4)     £ 6.50  
Add to basketBasket
Audio Grade Spade connector

24K Gold Plated.
Solder/Crimp fitting.
Supplied with colour coded soft plastic sleeves (2x Red + 2x Black).

Dimensions:
Width of spade jaws: 6.9 mm
Total width of spade: 12 mm
Depth of spade jaws: 10 mm
Max cable diameter: 4 mm

Supplied in sets of 4.

TO ORDER ONLY


Insert Audio SP-06 Dual Spades (pack of 4)     £ 12.50  
Add to basketBasket
Audio Grade Spade connector

Dual cut-out, allows fitting to 6mm and 8 mm binding posts.
Angled end (approx 20 degrees)
24K Gold Plated.
Solder/Crimp fitting.
Supplied with colour coded soft plastic sleeves (2x Red + 2x Black).

Dimensions:
Width of spade jaws: 6mm + 8 mm
Total width of spade: 14 mm
Depth of spade: 10 mm
Max cable diameter: 4 mm

Supplied in sets of 4.

TO ORDER ONLY


Insert Audio IA-4SOL Banana plugs (pack of 4)     £ 7.95  
Add to basketBasket
Audio Grade Banana plug connector

Sprung tip ensures positive connection
24K Gold Plated
Solder fitting only.
Supplied with colour coded hard plastic sleeves (2x Red + 2x Black).

Dimensions:
Length of banana tip: 16 mm
Max cable diameter: 4 mm (if within 'bucket') - larger diameters can be accomodated

Supplied in sets of 4.

Please note - a high temperature soldering iron is required for these connectors in order to ensure a good joint.

TO ORDER ONLY


Supra Banana (per pair)     £ 9.99  
Add to basketBasket

Supra Banana (i.e. 4mm) plugs are capable of accepting speaker cables upto 10mm (7AWG) in diameter and can be used as either 'straight' or 'right angle' fitting (which is especially suitable for speakers, as the cable can exit the plug downwards, rather than outwards).

Heavy gold-plated finish. Uses a grub screw to hold speaker cable securely in place.

Connection Type: BAREWIRE (via grubscrew)

Sold as 2 connectors - 1 Red and 1 Black.

Priced per pair, loose, without original packing, which is a 16% saving over the packed prices.

TO ORDER ONLY


Supra LoRad MD06-EU 6 way Euro Mains Block     £ 129.99  
Add to basketBasket
NEW - The Supra MD06-EU Mains Distribution Block is also available.

NOTE: Input to the MD06-EU is via a single IEC socket, enabling you to (optionally) specify the exact length of cable you need to go from wall socket to block.

This block is fitted with 6x Schuko mains sockets.

A Non-Intrusive Mains Filter reduces the mains borne interference, while the all aluminium extruded chassis acts as a shield against RF.

(This version does NOT have Surge Protection built-in).

A number of holes are present in the bottom flange of the block, allowing it to be screwed to a wall or other support.

A 10 Amp current sensing relay switch is fitted, which if tripped, can be easily reset.

Picture and exact specification to follow (once confirmed).

Priced each.

This item is ONLY available for sale to EC customers, as it is NOT LEGAL to use this in the UK for domestic purposes. It is acceptable for us to sell this on a strictly industrial basis, for example: to enable foreign touring groups to use their requipment in UK.

To order only


Basic IEC Connector - Straight - HOT type     £ 3.99  
Add to basketBasket

A standard fit 3-pole IEC in-line socket connector HOT type) made by Schurter.

This connector will fit audio and AV equipment which are fitted with standard 6 Amp IEC 'kettle' type sockets. NOTE: This connector has a groove at the bottom where the connector fits inside the IEC socket - this is because this connector is called a 'HOT' type and is approved for use with products which generate or become 'HOT' (such as kettles).

CE-approved - 10A, 250V
CSA-approved - 15A, 250V
UL-approved
General Rating: 15A, 125V A.C. for North America (or 10A, 230V for EC).
Clamshell design, with a single screw holding the two piece body together.
Brass internal fittings.
Colour: Black only
Max Cable Entry diameter: 8mm (just right for LoRad 1.5)

To use this IEC connector with LoRad 2.5, you must dispense with the cable exit gland.

This connector has a very effective strain relief grip that can be used to ensure the cable cannot be pulled out of the connector.

Priced each.

IN STOCK


http://www.cablesdirect2u.co.uk/shop/index.html