mains blocks and cables

NEW - the Supra MD06-BS/SP 6-way Surge Protected UK Mains Distribution Blocks have now been announced and have BS approval granted to them. After quite a delay (over a year, while BS approval was taking place), we've now got these in stock...! So make sure you place your order soonest, so you are not waiting too long and can take advantage of the initial 'launch price' of just £129.99 (inc VAT) valid until present stocks run out..

---

Supra LoRad 1.5 CS-BS UK shielded mains cable - factory terminated

Was £ 48.00 £ 43.20

Hi-Fi Choice - 2x 'Bronze award winner' - Dec 2004 AND Dec 2005 The Supra LoRad 1.5 is a CE-approved audio grade replacement mains cable which is available with factory terminated connectors: Either with a UK 13 Amp mains plug or a European Schuko connector (for European customers only). At the opposite end, a matching Supra IEC connector is fitted. Now you can effectively shield all those sensitive low-level audio and video cables from picking up stray electro-magnetic interference from your existing (low cost) mains cable by replacing it with this cable. And buying the factory terminated version solves the problem of buying the parts and wiring them yourself !! The factory-terminated LoRad 1.5 is available in a range of lengths. Please do NOT compare this cable to other replacement mains cables, which may NOT be assembled using a CE-approved cable - and hence may not be safety tested and fit for the purpose - LoRad cables fully conform to the strict CE-testing procedures and hence are approved for use in all CE markets (including UK). Current rating: 10 Amps Only available with Ice Blue outer sheathing Available lengths: UK 13 Amp standard: 1.0m - IN STOCK 1.5m - IN STOCK 2.0m - IN STOCK 4.0m - IN STOCK Schuko European standard: 1.0m - IN STOCK 1.5m - IN STOCK 2.0m - IN STOCK No other lengths available at present Please place your order now - we will not charge your credit card until ready to ship.

Length LoRad 1.5 - 1.0m 13A - IEC LoRad 1.5 - 1.5m 13A - IEC + £ 5.00 LoRad 1.5 - 2.0m 13A - IEC + £ 10.00 LoRad 1.5 - 4.0m 13A - IEC + £ 30.00

Connectors British standard UK 13 Amp plug Schuko Euro mains plug

---

Supra LoRad 1.5 CS-EU European shielded mains cable - factory terminated

Was £ 54.00 £ 48.60

The Supra LoRad 1.5 is a CE-approved audio grade replacement mains cable which is available with factory terminated European Schuko connector (for European customers only). At the opposite end, a matching Supra IEC connector is fitted. Now you can effectively shield all those sensitive low-level audio and video cables from picking up stray electro-magnetic interference from your existing (low cost) mains cable by replacing it with this cable. And buying the factory terminated version solves the problem of buying the parts and wiring them yourself !! The factory-terminated LoRad 1.5 is available in a range of lengths. Please do NOT compare this cable to other replacement mains cables, which may NOT be assembled using a CE-approved cable - and hence may not be safety tested and fit for the purpose - LoRad cables fully conform to the strict CE-testing procedures and hence are approved for use in all CE markets (including UK). Current rating: 10 Amps Only available with Ice Blue outer sheathing Available lengths: Schuko European standard: 1.0m 1.5m 2.0m No other lengths available at present Please place your order now - we will not charge your credit card until ready to ship.

Length LoRad 1.5 - 1.0m EU - IEC LoRad 1.5 - 1.5m EU - IEC + £ 5.00 LoRad 1.5 - 2.0m EU - IEC + £ 10.00

---

Supra LoRad 2.5 CS-EU European shielded mains cable - factory terminated

Was £ 59.00 £ 53.10

The Supra LoRad 2.5 is a CE-approved audio grade replacement mains cable which is available with factory terminated European Schuko connector (for European customers only). At the opposite end, a matching Supra IEC connector is fitted - either the standard 10 Amp or the High power C19 style 16 Amp. (A factory terminated UK version is NOT available as the individual cable conductors are greater than 1.5 sq. mm diameter, which is greater than the BS regulations allow !!). Now you can effectively shield all those sensitive low-level audio and video cables from picking up stray electro-magnetic interference from your existing (low cost) mains cable by replacing it with this cable. And buying the factory terminated version solves the problem of buying the parts and wiring them yourself !! The factory-terminated LoRad 2.5 is available in a range of lengths. Please do NOT compare this cable to other replacement mains cables, which may NOT be assembled using a CE-approved cable - and hence may not be safety tested and fit for the purpose - LoRad cables fully conform to the strict CE-testing procedures and hence are approved for use in all CE markets (including UK). Current rating: 10/16 Amps Only available with Ice Blue outer sheathing Available lengths: Schuko European standard: 1.0m 1.5m 2.0m No other lengths available at present Please place your order now - we will not charge your credit card until ready to ship.

Length LoRad 2.5 - 1.0m EU - IEC LoRad 2.5 - 1.5m EU - IEC + £ 7.50 LoRad 2.5 - 2.0m EU - IEC + £ 15.00

Connectors SWF-10 IEC connector SWF-16 IEC connector

---

Supra LoRad MD06-BS/SP 6 way UK Mains Block

Was £ 150.00 £ 135.00

The Supra MD06-BS/SP Mains Distribution Block is now available. This block is fitted with 6x UK 13 Amp mains sockets, which are fitted at 45 degrees, so as to reduce the floor space that the block takes up. A three way Surge Protection system, protects Live<>Neutral, Live<>Earth and Neutral<>Earth, thereby protecting your hi-fi and AV system from most of the nasties present on the UK mains supply. A Non-Intrusive Mains Filter also reduces the mains borne interference, while the all aluminium extruded chassis acts as a shield against RF. A number of holes are present in the bottom flange of the block, allowing it to be screwed to a wall or other support. Priced each. NOTE: The Mains input to the MD06-BS/SP is via a single IEC socket, enabling you to (optionally) specify the exact length of cable you need to go from wall socket to block - if you need an 'input cable', then you can select the length you need and as a result, you can buy the cable and block at a subsidised price.

Mains input cables No cable supplied LoRad 1.5 UK>IEC mains cable 1.0m + £ 28.00 LoRad 1.5 UK>IEC mains cable 1.5m + £ 33.00 LoRad 1.5 UK>IEC mains cable 2.0m + £ 38.00 LoRad 1.5 UK>IEC mains cable 4.0m + £ 58.00

---

Supra LoRad MD06-EU Mk 11 6 way European Mains Block

Was £ 120.00 £ 108.00

The Supra MD06-EU Mk 11 Mains Distribution Block is now available for use in most European countries, where Schuko mains plugs are used. This block is fitted with 6x Schuko mains sockets. A Non-Intrusive Mains Filter also reduces the mains borne interference, while the all aluminium extruded chassis acts as a shield against RF. A number of holes are present in the bottom flange of the block, allowing it to be screwed to a wall or other support. NOTE: Input to the MD06-EU Mk 11 is via a single IEC socket, so you can use the exact length of mains cable to go from wall socket to block, as a mains input cable is NOT supplied with this item. Priced each.

---

Supra LoRad MD06-EU/SP 6 way European Mains Block

Was £ 140.00 £ 126.00

The Supra MD06-EU/SP Mains Distribution Block is now available for use in most European countries, where Schuko mains plugs are used. This block is fitted with 6x Schuko mains sockets. A three way Surge Protection system, protects Live<>Neutral, Live<>Earth and Neutral<>Earth, thereby protecting your hi-fi and AV system from most of the nasties present on the mains supply. A Non-Intrusive Mains Filter also reduces the mains borne interference, while the all aluminium extruded chassis acts as a shield against RF. A number of holes are present in the bottom flange of the block, allowing it to be screwed to a wall or other support. NOTE: Input to the MD06-EU Mk 11 is via a single IEC socket, so you can use the exact length of mains cable to go from wall socket to block, as a mains input cable is NOT supplied with this item. Priced each.

---

Supra LoRad 1.5 kit Supra 13A UK Mains Plug to IEC In-Line Socket

Was £ 10.00 £ 9.00

A DIY kit comprising: 1x Supra UK 13A Mains Plug With Gold-plated pins 13 Amp fuse fitted. BS1363-approved. Colour: Ice Blue (to match cable colour). 1x piece of Supra LoRad 1.5 Mains Cable One cut length of Supra LoRad 1.5 shielded mains cable. Choice of 0.75m, 1.0m, 1.5m, 2.0m, 3.0m or 4.0m lengths. Current rating: 10 Amps Available with Ice Blue or Grey outer sheathing A choice of IEC Connectors Choose from either: 1) Basic version Available in - right angled, COLD or HOT types. CE-approved. Made by Schurter. Clamshell design, with a single screw holding the two piece body together. Brass internal fittings. Colour: BLACK only or 2) Supra SWF-10 IEC A standard fit IEC in-line socket connector (aka 'kettle plug') CE-approved Brass internal fittings Colour: GREY or 3) Supra SWF-16 IEC A High Current IEC in-line socket connector (as used on Musical Fidelity and other high power products) CE-approved Brass internal fittings Colour: GREY Note: We only supply the parts - this cable must be assembled by the customer. Common sense electrical knowledge required. Be sure to download the 'SAFETY ADVICE' document, available from this link: HERE, so you know how to prepare and connect the LoRad conductors to mains connectors. IN STOCK

Cable length: LoRad 1.5 (0.75m) + £ 7.50 LoRad 1.5 (1.0m) + £ 10.00 LoRad 1.5 (1.5m) + £ 15.00 LoRad 1.5 (2.0m) + £ 20.00 LoRad 1.5 (3.0m) + £ 30.00 LoRad 1.5 (4.0m) + £ 40.00

IEC type: Right Angle IEC - COLD type + £ 3.99 Right Angle IEC - HOT type + £ 3.99 Straight IEC - HOT type + £ 3.99 Supra SWF-10 IEC Grey + £ 12.00 Supra SWF-16 IEC Grey + £ 12.00

---

Supra LoRad 1.5 kit Supra 13A UK Mains Plug to 1x 4-way UK Extension

Was £ 10.00 £ 9.00

A DIY kit comprising: 1x Supra UK 13A Mains Plug With Gold-plated pins 13 Amp fuse fitted. BS1363-approved. Colour: Ice Blue (to match cable colour). 1x piece of Supra LoRad 1.5 Mains Cable One cut length of Supra LoRad 1.5 shielded mains cable. Choice of 1.0m, 2.0m, 3.0m or 4.0m lengths. Current rating: 10 Amps Available with Ice Blue or Grey outer sheathing Choice of 4 way extension sockets 1) 1x 4-way Extension Socket, unfused and fitted with Red neon bulb. BS-approved. Colour: WHITE or 2) 1x 4-way Extension Socket, fused and fitted with Red neon bulb. BS-approved. Colour: WHITE Note: We only supply the parts - this cable must be assembled by the customer. Common sense electrical knowledge required. Be sure to download the 'SAFETY ADVICE' document, available from this link: HERE, so you know how to prepare and connect the LoRad conductors to mains connectors. IN STOCK

Socket type: Unfused - 4 way (White) + £ 3.99 Fused - 4 way (White) + £ 3.99

Cable length: LoRad 1.5 (1.0m) + £ 10.00 LoRad 1.5 (2.0m) + £ 20.00 LoRad 1.5 (3.0m) + £ 30.00 LoRad 1.5 (4.0m) + £ 40.00

---

Supra LoRad 2.5 kit Supra 13A UK Mains Plug to IEC In-Line Socket

Was £ 10.00 £ 9.00

A DIY kit comprising: 1x Supra UK 13A Mains Plug With Gold-plated pins 13 Amp fuse fitted. BS1363-approved. Colour: Ice Blue (to match cable colour). 1x piece of Supra LoRad 2.5 Mains Cable One cut length of Supra LoRad 2.5 shielded mains cable. Choice of 0.75m, 1.0m, 1.5m, 2.0m, 3.0m or 4.0m lengths. Current rating: 16 Amps Only available with Ice Blue outer sheathing A choice of IEC Connectors Choose from either: 1) Basic version Available in right angled, COLD or HOT types. CE-approved. Made by Schurter. Clamshell design, with a single screw holding the two piece body together. Brass internal fittings. Colour: BLACK only or 2) Supra SWF-10 IEC A standard fit IEC in-line socket connector (aka 'kettle plug') CE-approved Brass internal fittings Colour: GREY or 3) Supra SWF-16 IEC A High Current IEC in-line socket connector (as used on Musical Fidelity and other high power products) CE-approved Brass internal fittings Colour: GREY Note: We only supply the parts - this cable must be assembled by the customer. Common sense electrical knowledge required. Be sure to download the 'SAFETY ADVICE' document, available from this link: HERE, so you know how to prepare and connect the LoRad conductors to mains connectors. IN STOCK

Cable length: LoRad 2.5 (0.75m) + £ 11.75 LoRad 2.5 (1.0m) + £ 15.00 LoRad 2.5 (1.5m) + £ 22.50 LoRad 2.5 (2.0m) + £ 30.00 LoRad 2.5 (3.0m) + £ 45.00 LoRad 2.5 (4.0m) + £ 60.00

IEC type: Right Angle IEC - COLD type + £ 3.99 Right Angle IEC - HOT type + £ 3.99 Straight IEC - HOT type + £ 3.99 Supra SWF-10 IEC - GREY + £ 12.00 Supra SWF-16 IEC - GREY + £ 12.00

---

Supra LoRad 2.5 kit Supra 13A UK Mains Plug to 1x 4-way UK Extension

Was £ 10.00 £ 9.00

A DIY kit comprising: 1x Supra UK 13A Mains Plug With Gold-plated pins 13 Amp fuse fitted. BS1363-approved. Colour: Ice Blue (to match cable colour). 1x piece of Supra LoRad 2.5 Mains Cable One cut length of Supra LoRad 2.5 shielded mains cable. Choice of 1.0m, 2.0m, 3.0m or 4.0m lengths. Current rating: 16 Amps Only available with Ice Blue outer sheathing Choice of 4 way extension sockets 1) 1x 4-way Extension Socket, unfused and fitted with Red neon bulb. BS-approved. Colour: WHITE or 2) 1x 4-way Extension Socket, fused and fitted with Red neon bulb. BS-approved. Colour: WHITE Note: We only supply the parts - this cable must be assembled by the customer. Common sense electrical knowledge required. Be sure to download the 'SAFETY ADVICE' document, available from this link: HERE, so you know how to prepare and connect the LoRad conductors to mains connectors. IN STOCK

Socket type: Unfused - 4 way (White) + £ 3.99 Fused - 4 way (White) + £ 3.99

Cable length: LoRad 2.5 (1.0m) + £ 15.00 LoRad 2.5 (2.0m) + £ 30.00 LoRad 2.5 (3.0m) + £ 45.00 LoRad 2.5 (4.0m) + £ 60.00

---

http://www.cablesdirect2u.co.uk/shop/index.html